Chargers

NeuEnergy X6 AC/DC Charger

Operating voltage range: 10.0~18.0Volt DC
100-240AC
Input power: max.50W for charging
max.5W for discharging
Charge current: 0.1~5.0A
Discharge current range: 0.1~1.0A
Current drain for balancing Li-Po: 300mAh/cell
NiCd/ NiMH battery cell count: 1~15cells
Lithium battery cell count: 1~6Series
Pb battery voltage: 2 to 20V
Weight: 635g
Dimension: 135×149×40mm

$69.00

More details

iCharger 206B

Input voltage range: 10 - 28.0VDC
Charge current range: 0.05 - 20.0A
Discharge current range: 0.05 - 20.0A
Maximum charge power capacity: 300W @ input voltage > 18V
Maximum discharge power capacity: 20W
Maximum extern discharge power capacity: 500W @ 25V/20A
Current drain for balancing: <350mA
Balance accuracy: <10mV
Lithium (LiPo/LiIo/LiFe) battery cell count: 1 - 6 series (In non-balance mode, expand LiFe to 8s)
NiCd/NiMH battery cell count: 1 - 17 series
Pb battery cell count: 1 - 12 series (2 - 24V)
Log Files storage: 16Mbit (36 hours)
Battery setup memories： 10
Intelligent temperature control: Yes
PC Connect: USB port
Weight: 350g
Dimensions (L *W * D): 134*83*25mm 5.28”*3.27”*0.98”

$145.00

More details

NeuEnergy 10X Charger

ePower and NeuEnergy have teamed up to bring you a high performance charger at a affordable price.

The X10 features:
Lilo/LiPo/LiFe: 1-10S
NiMH/NiCd : 1-25 Cells
Lead Acid: 2-36v
Charge: .05- 10A ( 300watts max)
Discharge: .05-7A(30 watt max)
Ch./disch.cycle :1-10
USB connection
10 setup memory
Includes 1 balancer adapter for NeuEnergy batteries
MSRP: $209
Introductory Price: $189

$165.00

More details

ePower/NeuEnergy X10 Features
l         High power, high current, high-performance power conversion circuit. The X10 series uses advanced buck-boost DC/DC converter technology. This not only saves power and reduces waste heat build up but also makes the charger more compact.
l         Two input power choices: DC jack with auto-resetting fuse (maximum input current 7A) and butt-welded alligator clips with 4mm bullet connectors (25A).The output power can be adjusted to match the available input power. The X10 series can be used with three types of Lithium batteries - LiPo, Lilo, LiFe - with a fully integrated cell balancer.
l         Internal temperature sensor and temperature controlled automatic cooling fan controls the internal temperature. When the internal temperature is over 60℃(140 oF), the output power is automatically reduced by 25%. If the temperature exceeds 65℃(149 oF) the charge cycle is stopped.
l         10 battery profile memories that can be saved and loaded by the user.
l         2x16 backlit LCD screen that provides information including active mode, current, voltage, total charge (mAh), charging time and temperature etc.
l         Various charging/discharging settings and cycles to suit a wide range of applications. For Lithium batteries: balance charging, normal charging, fast charging, storage, discharging, ext-discharging, charge/discharge cycling, and battery monitoring. For NiCd/NiMH batteries: charging-auto, charging-manual, discharging, charge/discharge cycling and forming charge. For Pb batteries: charging and discharging.
l         Expanded discharge program. When an external resistor is used, the maximum discharge power capacity is 280W (@40V/7A).
l         Unique Lithium battery Monitor program. When using other equipment to charge or discharge a Lithium pack, you can use the X10 to monitor the per-cell voltages, battery temperature and cycle time. If any individual cell appears over-charged or over-discharged or the pack is too hot or the process has gone on for too long, the X10 will generate an alarm sound and the related information will flash on the display.
l         Electric motor test mode can be used to run-in brushed electric motors, test motor parameters and performance, check tolerances etc.
l         Foam-cut drive. In this mode, the charger acts as a convenient power supply for a hot wire foam cutter.
l         Battery resistance measurement. The X10 can measure the internal resistance of the battery pack, and also can measure the per-cell internal resistance (only available for lithium battery).
l         Self protection. The X10 has protection for reversed polarity (input or output), low input voltage, battery temperature, charging capacity and time overrun.
l        The X10 firmware is updateable by use of a PC and the built in USB port.The X10 also support the “Open Format” data of the “logview” software and can display, plot and analyze the charge and discharge data by it. (See detail information about logview in the following website, http://www.logview.info)

iCharger 3010B

The best solution so far for charging the larger batteries!
Specifications:
Input voltage range: 4.50 – 38.0VDC
Charge current range: 0.05 – 30.0A
Discharge current range: 0.05 – 30.0A
Maximum charge power capacity: 1000W @ input voltage 23V (500W @ input voltage 12V)
Maximum discharge power capacity: 80W
Maximum regenerative discharge power capacity: 1000W
Maximum extern discharge power capacity: 1200W @ 40V/30A
Current drain for balancing: <350mA
Balance accuracy: <10mV
Lithium (LiPo/LiIo/LiFe) battery cell count: 1-10 series (In non-balance mode, LiFe expandable to 12s)
NiCd/NiMH battery cell count: 1–25 series
Pb battery cell count: 1–18 series (2–36V)
Battery setup memories: 10
Intelligent temperature control: Yes
PC Connect: USB port
Weight: 750g
Dimensions (L X W X D): 143X123X46mm / 5.63'X4.84'X1.81'
Uses the same balance adapters as the X10 charger

$219.00

More details

Balance adapters and plugs for X10	price	Part#
Neu/Kokam(EH)	Included	X6 ADP 01
Align(XH)	$5	X6 ADP 02
TP/FP	$5	X6 ADP 03
PQ/Hyp	$5	X6 ADP 04

Please select the part# you need.

Balance adapters and plugs for X10	price	Part#
Neu/Kokam(EH)	Included	X10 ADP 01
Align(XH)	$6.50	X10 ADP 02
TP/FP	$6.50	X10 ADP 03
PQ/Hyp	$6.50	X10 ADP 04

Please select the part# you need.

NeuMotors Store

Great Products and Prices!

Shipping:

International Shipping

NeuEnergy X6 AC/DC Charger

iCharger 106B+

iCharger 206B

iCharger 208B

NeuEnergy 10X Charger

iCharger 3010B

P350 Power Supply

X6 balance adapters

X10 balancer adapter boards

Balancer Adapter Plug for X10 Charger

4mm to T connector.

Nearly Universal Adapter